This function automatically adjusts the intensity of the original on the Platen Glass.
If you select Print quality (speed-priority) with the media type set to Plain paper and the quality is not as good as expected, select Print quality (standard) or Print quality (quality-priority) and then try copying again. You can set the print quality to Print quality (speed-quality) only when Plain paper is selected for the media type. However, if Borderless copy is selected, enlargement/reduction ratio differs from that when Standard copy is selected. 
Even if Borderless copy or Frame erase is selected, you can copy with the specified ratio by selecting a page size. If Borderless copy is selected, slight cropping may occur at the edges since the copied image is enlarged to fill the whole page. If Borderless copy is selected, select A4, 4"圆"(10x15cm), 5"x7"(13x18cm) or 8.5"x11"(LTR) for the page size and any types of paper except Plain paper for the media type. You can specify the amount of extension in Extension amount under Device settings, when Borderless copy is selected for the copy type. Combination of some items cannot be specified depending on the function. 
Settings such as the page size, media type, and print quality are retained, and these settings will appear next time when the copy mode is selected even if the power is turned off and on. To change the settings, use the (Up) or (Down) button to select the item to change, and press the (Left) or (Right) button. Here we confirm that Standard copy for the copy type, 100% for the magnification, A4 for the page size, Plain paper for the media type, and Print quality (standard) for the print quality are specified. (3) Confirm the copy type, magnification, page size, media type, etc. (1) Press the (Up) or (Down) button to specify the number of copies. 
Load the original WITH THE SIDE TO COPY FACING DOWN and align it with the alignment mark as shown below. (4) Load an original on the Platen Glass. (3) Open the Paper Output Tray gently, and open the Output Tray Extension. Here we load A4 plain paper in the Rear Tray.
You can also display the copy mode screen by selecting Copy on the top menu screen displayed by pressing the Menu button.
0 kommentar(er)
